Difference between revisions of "Linux"

from HTYP, the free directory anyone can edit if they can prove to me that they're not a spambot
Jump to navigation Jump to search
(→‎[[device management (Linux)|device management]]: reorg, with listing of related pages)
Line 70: Line 70:
  
 
==Reference Links==
 
==Reference Links==
*[http://tuxmobil.org/ TuxMobil]: Linux With Laptops, Notebooks, PDAs and Mobile Cell Phones
+
* [http://tldp.org/ The Linux Documentation Project]: lots of documentation, somewhat awkwardly presented
*[http://www.reallylinux.com/ Really Linux]: for beginning Linux users
+
* [http://tuxmobil.org/ TuxMobil]: Linux With Laptops, Notebooks, PDAs and Mobile Cell Phones
*[http://wiki.linuxquestions.org/ LinuxQuestions wiki]
+
* [http://www.reallylinux.com/ Really Linux]: for beginning Linux users
*[http://linux.ctyme.com/ Linux Manpages]: [[manpages]] documentation as searchable web pages
+
* [http://wiki.linuxquestions.org/ LinuxQuestions wiki]
*[http://arstechnica.com/guides/tweaks/linux-audio.ars Linux audio]: guide to audio apps/systems in Linux
+
* [http://linux.ctyme.com/ Linux Manpages]: [[manpages]] documentation as searchable web pages
*[http://www.net-security.org/article.php?id=809 Securing Linux]
+
* [http://arstechnica.com/guides/tweaks/linux-audio.ars Linux audio]: guide to audio apps/systems in Linux
*[http://opensourceversus.com/modules.php?op=modload&name=News&file=article&sid=155&mode=thread&order=0&thold=0 Windows vs. Linux]: comparative screenshots
+
* [http://www.net-security.org/article.php?id=809 Securing Linux]
 +
* [http://opensourceversus.com/modules.php?op=modload&name=News&file=article&sid=155&mode=thread&order=0&thold=0 Windows vs. Linux]: comparative screenshots
 
* 2005-08-30 [http://www.freedesktop.org/~jonsmirl/graphics.html The State of Linux Graphics]: technical backgrounder
 
* 2005-08-30 [http://www.freedesktop.org/~jonsmirl/graphics.html The State of Linux Graphics]: technical backgrounder
 +
 
==News/Opinion Links==
 
==News/Opinion Links==
 
* '''2007-03-13''' [http://online.wsj.com/article_email/SB117374336173334742-lMyQjAxMDE3NzEzMjcxNDIzWj.html Linux Starts to Find Home on Desktops]
 
* '''2007-03-13''' [http://online.wsj.com/article_email/SB117374336173334742-lMyQjAxMDE3NzEzMjcxNDIzWj.html Linux Starts to Find Home on Desktops]

Revision as of 21:51, 15 April 2007

Navigation

computing: software: operating systems: Linux

This is a growing seedling article. You can help HTYP by watering it.

Articles

Components

Desktop Environments

devices

Applications

Security

Hardware

Firmware

Support Groups

Reference Links

News/Opinion Links

Issues

The following may reflect my own ignorance rather than an actual shortcoming in Linux:

  • Development
    • There appears to be no universal mechanism corresponding to ActiveX (as used for desktop app development); DCOP, which seems at least somewhat similar, is only available under KDE
    • There appears to be no application corresponding to Microsoft Access. Yes, you can do all the same stuff with various available tools, but not quickly; v2.0 of OpenOffice is apparently going to include a tool which may be a step in the right direction (OpenOffice Base), and I have seen evidence of other Access-like tools in development...
  • Regular Use
    • In Windows, if you create a link to an executable script (batch file -- *.bat) on your desktop (or anywhere), the link is executable with a double-click. Linux .sh (shell script) files are equivalent to Windows .bat files, and much more powerful, but can't be executed by clicking on them directly (at least, not in the standard/default configuration). The exact procedure depends on the environment you are using:
      • KDE: right-click on the desktop and select Create New -> Link to Application...; when the dialog pops up, select the Application tab, and then next to the "Command:" edit box click the "Browse..." button to browse for the .sh file.

Criticisms of UNIX, from which Linux is derived: 10 Things I Hate About UNIX

Things You Must Know

In Linux, you often run into things which you Just Have To Know in order to make things work; there is not really any way to find them out. This is bad UI design, but for now it's the situation. I will be listing them here as I find them out.

  • If you accidentally hit Ctrl-Z (control Z), this suspends your current process and pops you back to the command line. To get back to the suspended process, type the command fg.
  • When Perl is missing a module, the package name is always (I am told) "perl-libraryname". For example, for Tk.pm, the package is perl-Tk. So in Fedora you would type "yum install perl-Tk". Presumably in debian-derived distributions, you would type "apt-get install perl-Tk", though I have not actually tested this. (Remember that package names, like Linux filenames, are case-sensitive, so that T must be uppercase or it won't work.) If the library is within a Perl package, e.g. Net::Telnet, then the format is perl-Package-Library, e.g. perl-Net-Telnet.
  • To run a binary which is located in the current directory, from the command line, you have to type "./" before the binary's name. This is because the current directory (most easily referenced with "./") is, by default, not included in the binary search path. There is much debate about whether or not this is a good thing, but at least it can be changed easily:
  • This command only changes the path for the current session:
export PATH=$PATH:.
  • To permanently change the default path for the current user, edit the ~/.bash_profile file
  • To permanently change the default path for all users (which may be overridden by individual user settings), edit the /etc/profile file
  • Linuxese for "help" is "man", which is short for "manual". This help system is often referred to as "the manpages".
  • To find out what version of the Linux kernel you are running:
    • cat /proc/version
  • Sometimes the GUI shutdown (in KDE, usually invoked via the K menu) mysteriously fails to work; in that case, you can invoke a shutdown using the shutdown command:
  • To find out what processes have locked a file (so you can kill them to allow editing again... but also make sure it's not a simple permissions problem first):
  • To add a user to a group (or a group to a user, however you want to say it):

How To

mount an ISO image as a folder

mount -o loop NameOfISO.iso /mount/wherever
On older distributions, you may need instead mount -o loop -t iso9660 ...
  • To swap drives so DOS or Windows can be booted off the 2nd drive:
    • On reboot, when you get to the boot loader startup, select whatever option gets you to a grub command line ("c" in Fedora Core)
    • At the grub prompt, enter the following:
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd1,0)
chainloader +1
makeactive
boot

This is a temporary fix which lets you test the changes without making your computer unbootable if they fail. To make the changes permanent, edit /boot/grub/menu.lst and enter the two "map" lines under the Windows entry. (Will document in more detail when I have time to look at the format of menu.lst. I'm also not sure if "hd" is always the prefix for the drives or if that might be different depending on the types of drives – e.g. SATA, ATA, IDE – involved.)

fix a messed-up time-zone

If the KDE Clock-setting widget seems to be refusing to set the time zone (or your system clock is refusing to show anything except GMT time), this command may work:

ln -s /usr/share/zoneinfo/America/NewYork /etc/localtime

...where "/America/NewYork" should be replaced by the appropriate file for your time zone. I have not been able to find any documentation on this feature; the command was suggested to me by someone in the #kde chat room at irc.freenode.net (see [1]). Remember to use the console "date" command to verify what the system clock is currently set to. --Woozle 08:45, 23 Apr 2005 (CST)

force an update of the system clock

ntpdate pool.ntp.org
  • To make this update run automatically, go into root and run kcron (or cron if you're comfortable with CLI, but note that you will need the exact path to ntpdate when creating the entry in cron (cron apparently runs with a different $PATH than the user environment). Use "which ntpdate" to find the path.
  • Emptying the Trash: KDE does have trash-management built in, but it's not always obvious. You can do any of the following:
    • Navigate (in Konqueror) to "trash:/", then right-click on the panel showing the contents, and select "Empty trash".
    • Right-click on the applet panel and add the Trash applet, then left-click on it to use its various functions.
    • Create a new URL link on the desktop, give it the URL "trash:/", then right-click on it (my preferred solution). A trashcan icon is available in the "filesystems" icon group.

reset the ftp kioslave

Konqueror's ftp access is done using a kioslave (kio_ftp), and sometimes that kioslave apparently stops responding, leading to Konqueror hanging while showing the message "Connecting..." in the status bar. The obvious thing to do is kill the kioslave and start over; I haven't yet been successful at this, but I was given this command to try (probably will work better as root):

killall -9 process name

...where process name might be something like "kio_ftp". (Check the process list for helpful hints.)

Firewalls

Some Linux distributions come with a GUI-based firewall management tool, but these generally are just wrappers around a set of text commands. Apparently, a firewall can be set up using iptables (or ipchains, although this is generally deprecated in newer systems); to query both commands for firewall rules:

iptables -L -v
ipchains -L -v

In Fedora Core 4, iptables is hidden in sbin, so you need to type it like this:

/sbin/iptables -L -v

There also seems to be a GUI app to configure the firewall (see this), but it's not clear how to run it. It may be that it can only be run at setup time. Try system-config-securitylevel.

Set up VNC to use an existing session

This sets up VNC to connect to an existing session, i.e. "control the user's screen", same as the default VNC server behavior in Windows. I have not tested it.

  • edit xorg.conf
  • find the "Module" section
  • make sure you're loading the vnc module
  • run vncpasswd (command) as root to set a password for the vnc server
  • in the "Screen" section of xorg.conf, add this:
    • Option "PasswordFile" "/root/.vnc/passwd"
  • save xorg.conf if you changed it