Difference between revisions of "Qemu"

Revision as of 17:20, 25 June 2005

Techniques: Software: Emuators: Qemu QEMU is an open source processor emulator. It emulates a variety of different [http://qemu.org/status.html CPUs and systems], and achieves good speed by using dynamic translation.

Articles

Qemu on Linux: setting up and using Qemu under Linux

Some Quick Notes

Creating the disk image: qemu-img create win98hd.img 2G qemu -hda

win98hd.img -cdrom win98.iso -boot d For linux host systems, there is a loadable kernel module (called kqemu) that will allow qemu to run at near native speeds. At the time of this writing, there aren't distributed packages available with the module built, so you'll need to download the source from the website and compile it locally. First download the qemu source and untar it. Then download the kqemu source and untar it within the qemu source directory. Then run ./configure && make && sudo make install. You might also want to install the vgabios package from your package manager. If you're wanting to run Windows 98 under qemu, this option is moot because kqemu and Win98 don't get along.

@@ Line 4: / Line 4: @@
 emulates a variety of different [http://qemu.org/status.html CPUs and
 systems], and achieves good speed by using dynamic translation.
+==Articles==
+*[[Qemu on Linux]]: setting up and using Qemu under Linux
 ==Some Quick Notes==
 *Creating the disk image: qemu-img create win98hd.img 2G qemu -hda
@@ Line 21: / Line 23: @@
 If you're wanting to run [[Windows 98]] under qemu, this option is moot
 because kqemu and Win98 don't get along.
-==Documentation==
-===NAME===
-[[qemu]] - QEMU System Emulator ===SYNOPSIS===
-usage: [[qemu]] [options] [disk_image] ===DESCRIPTION===
-The QEMU System emulator simulates a complete PC. In order to meet
-specific user needs, two versions of QEMU are available: #"qemu-fast"
-uses the host Memory Management Unit (MMU) to simulate the x86 MMU. It
-is fast but has limitations because the whole 4 GB address space cannot
-be used and some memory mapped peripherials cannot be emulated
-accurately yet. Therefore, a specific guest Linux kernel can be used
-Moreover there is no separation between the host and target address
-spaces, so it offers no security (the target OS can modify the
-"qemu-fast" code by writing at the right addresses). #"qemu" uses a
-software MMU. It is about two times slower but gives a more accurate
-emulation and a complete separation between the host and target address
-spaces. QEMU emulates the following PC peripherials: *i440FX host PCI
-bridge and PIIX3 PCI to ISA bridge *Cirrus CLGD 5446 PCI VGA card or
-dummy VGA card with Bochs VESA extensions (hardware level, including
-all non-standard modes). *PS/2 mouse and keyboard *2 PCI IDE interfaces
-with hard disk and CD-ROM support *Floppy disk *NE2000 PCI network
-adapters *Serial ports *Soundblaster 16 card QEMU uses the PC BIOS from
-the [[Bochs]] project and the Plex86/Bochs LGPL VGA BIOS. ===OPTIONS===
-*''disk_image'' is a raw hard disk image for IDE hard disk 0.
-====General options====
-*'''-fda''' ''file''
-*'''-fdb''' ''file''
-:Use file as floppy disk 0/1 image You can use the host floppy by using
-/dev/fd0 as filename. *'''-hda''' ''file''
-*'''-hdb''' ''file''
-*'''-hdc''' ''file''
-*'''-hdd''' ''file''
-:Use file as hard disk 0, 1, 2 or 3 image *'''-cdrom''' ''file''
-:Use file as CD-ROM image (you cannot use -hdc and and -cdrom at the
-same time). You can use the host CD-ROM by using /dev/cdrom as
-filename. *'''-boot''' ['''a'''|'''c'''|'''d''']
-:Boot on floppy (a), hard disk (c) or CD-ROM (d). Hard disk boot is the
-default. *'''-snapshot'''
-:Write to temporary files instead of disk image files. In this case,
-the raw disk image you use is not written back. You can however force
-the write back by pressing C-a s *'''-m''' ''megs''
-:Set virtual RAM size to ''megs'' megabytes. Default is 128 MB.
-*'''-nographic'''
-:Normally, QEMU uses SDL to display the VGA output. With this option,
-you can totally disable graphical output so that QEMU is a simple
-command line application. The emulated serial port is redirected on the
-console. Therefore, you can still use QEMU to debug a Linux kernel with
-a serial console. *'''-enable-audio'''
-:The SB16 emulation is disabled by default as it may give problems with
-Windows. You can enable it manually with this option. *'''-localtime'''
-:Set the real time clock to local time (the default is to UTC time).
-This option is needed to have correct date in
-MS-DOS or Windows. *'''-full-screen'''
-:Start in full screen. ====Network options====
-*'''-n''' ''script''
-:Set TUN/TAP network init script [default=/etc/qemu-ifup]. This script
-is launched to configure the host network interface (usually tun0)
-corresponding to the virtual NE2000 card. *'''-macaddr''' ''addr''
-:Set the mac address of the first interface (the format is
-aa:bb:cc:dd:ee:ff in hexa). The mac address is incremented for each new
-network interface. *'''-tun-fd''' ''fd''
-:Assumes ''fd'' talks to a tap/tun host network interface and use it.
-Read <http://bellard.org/qemu/tetrinet.html> to have an example
-of its use. *'''-user-net'''
-:Use the user mode network stack. This is the default if no tun/tap
-network init script is found. *'''-tftp''' ''prefix''
-:When using the user mode network stack, activate a built-in TFTP
-server. All filenames beginning with ''prefix'' can be downloaded from
-the host to the guest using a TFTP client. The TFTP client on the guest
-must be configured in binary mode (use the command "bin" of the Unix
-TFTP client). The host IP address on the guest is as usual 10.0.2.2.
-*'''-smb''' ''dir''
-:When using the user mode network stack, activate a built-in SMB server
-so that Windows OSes can access to the host files in ''dir''
-transparently. :In the guest Windows OS, the line: 10.0.2.4 smbserver
-:must be added in the file C:\WINDOWS\LMHOSTS (for windows 9x/Me) or
-C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS (Windows NT/2000). Then dir can
-be accessed in \\smbserver\qemu. :Note that a SAMBA server must be
-installed on the host OS in /usr/sbin/smbd. QEMU was tested succesfully
-with smbd version 2.2.7a from the Red Hat 9. *'''-redir'''
-['''tcp'''|'''udp''']''':'''''host-port''''':'''[''guest-host'']''':'''''guest-port''
-:When using the user mode network stack, redirect incoming TCP or UDP
-connections to the host port host-port to the guest guest-host on guest
-port guest-port. If guest-host is not specified, its value is 10.0.2.15
-(default address given by the built-in DHCP server). :For example, to
-redirect host X11 connection from screen 1 to guest screen 0, use the
-following: # on the host [[qemu]] -redir tcp:6001::6000 [...] # this
-host xterm should open in the guest X11 server [[xterm]] -display :1
-:To redirect telnet connections from host port 5555 to telnet port on
-the guest, use the following: # on the host [[qemu]] -redir
-tcp:5555::23 [...] [[telnet]] localhost 5555
-:Then when you use on the host "telnet localhost 5555", you connect to
-the guest telnet server. *'''-dummy-net'''
-:Use the dummy network stack: no packet will be received by the network
-cards. ====Linux boot specific====
-When using these options, you can use a given Linux kernel without
-installing it in the disk image. It can be useful for easier testing of
-various kernels. *'''-kernel''' ''bzImage''
-:Use ''bzImage'' as kernel image. *'''-append''' ''cmdline''
-:Use cmdline as kernel command line *'''-initrd''' ''file''
-:Use ''file'' as initial ram disk. ====Debug/Expert options====
-*'''-serial''' ''dev''
-:Redirect the virtual serial port to host device ''dev''. Available
-devices are: **"vc"
-**:Virtual console **"pty"
-**:[Linux only] Pseudo TTY (a new PTY is automatically allocated)
-**"null"
-**:void device **"stdio"
-**:[Unix only] standard input/output :The default device is "vc" in
-graphical mode and "stdio" in non graphical mode. :This option can be
-used several times to simulate up to 4 serials ports. *'''-monitor'''
-''dev''
-:Redirect the monitor to host device ''dev'' (same devices as the
-serial port). The default device is "vc" in graphical mode and "stdio"
-in non graphical mode. *'''-s'''
-:Wait gdb connection to port 1234 *'''-p''' ''port''
-:Change gdb connection port. *'''-S'''
-:Do not start CPU at startup (you must type 'c' in the monitor).
-*'''-d'''
-:Output log in /tmp/qemu.log *'''-isa'''
-:Simulate an ISA-only system (default is PCI system). *'''-std-vga'''
-:Simulate a standard VGA card with Bochs VBE extensions (default is
-Cirrus Logic GD5446 PCI VGA) *'''-loadvm''' ''file''
-:Start right away with a saved state ("loadvm" in monitor) ====PowerPC
-Options====
-The following options are specific to the PowerPC emulation:
-*'''-prep'''
-:Simulate a PREP system (default is PowerMAC) *'''-g'''
-''W'''''x'''''H''['''x'''''DEPTH'']
-:Set the initial VGA graphic mode. The default is 800x600x15.
-===Keys===
-During the graphical emulation, you can use the following keys:
-*'''Ctrl-Alt-f'''
-*:Toggle full screen *'''Ctrl-Alt-'''''n''
-*:Switch to virtual console 'n'. Standard console mappings are:
-**'''1''' : Target system display **'''2''' : Monitor **'''3''' :Serial
-port *'''Ctrl-Alt'''
-*:Toggle mouse and keyboard grab. *In the virtual consoles, you can use
-'''Ctrl-Up''', '''Ctrl-Down''', '''Ctrl-PageUp''' and
-'''Ctrl-PageDown''' to move in the back log. *During emulation, if you
-are using the -nographic option, use '''Ctrl-a h''' to get terminal
-commands: **'''Ctrl-a h'''
-**:Print this help **'''Ctrl-a x'''
-**:Exit emulatior **'''Ctrl-a s'''
-**:Save disk data back to file (if -snapshot) **'''Ctrl-a b'''
-**:Send break (magic sysrq in Linux) **'''Ctrl-a c'''
-**:Switch between console and monitor **'''Ctrl-a Ctrl-a'''
-**:Send Ctrl-a ===SEE ALSO===
-The HTML documentation of QEMU for more precise information and Linux
-user mode emulator invocation. ===AUTHOR===
-Fabrice Bellard
-==Edit Log==
-*'''2005-06-25''': Added contents of manpage

Difference between revisions of "Qemu"

Revision as of 17:20, 25 June 2005

Articles

Some Quick Notes

Navigation menu

Search