|
|
| (One intermediate revision by the same user not shown) |
| Line 8: |
Line 8: |
| ==Articles== | | ==Articles== |
| *[[Qemu on Linux]]: setting up and using Qemu under Linux | | *[[Qemu on Linux]]: setting up and using Qemu under Linux |
| ==Notes==
| | *[[Win98 in Qemu]]: installing and running [[Windows 98]] inside Qemu |
| ===Creating the disk image===
| |
| [[qemu-img]] create win98hd.img 2G
| |
| [[qemu]] -hda win98hd.img -cdrom win98.iso -boot d
| |
| ===Accessing the disk image from Linux===
| |
| In general, assuming the image file was made with the default disk head/sector parameters:
| |
| [[sudo]] [[mount]] -o loop,offset=32256 <u>/path/to/image</u> <u>/path/to/directory/</u>
| |
| Specific example ({{Woozle}}'s system):
| |
| [[sudo]] [[mount]] -o loop,offset=32256 /home/woozle/win98/c.img /mnt/qemu
| |
| The reason for the offset is that the image represents an entire ''disk''; you can only mount a ''partition'', not the entire disk. The offset is where the main partition starts. You can find out where partitions are in a disk image by using fdisk:
| |
| [[fdisk]] /path/to/image
| |
| Woozle example:
| |
| [[fdisk]] /home/woozle/win98/c.img
| |
| This takes you to a menu, where you type "p" to get a partition table:
| |
| Command (m for help): p
| |
|
| |
| Disk c.img: 0 MB, 0 bytes
| |
| 64 heads, 63 sectors/track, 0 cylinders
| |
| Units = cylinders of 4032 * 512 = 2064384 bytes
| |
|
| |
| Device Boot Start End Blocks Id System
| |
| c.img1 * 1 520 1048288+ c W95 FAT32 (LBA)
| |
| | |
| Based on what I worked out below (which you don't need to read unless that sort of thing interests you), you work this equation to find the correct offset:
| |
| [Start] x [bytes-per-sector] x [sectors/track]
| |
| ...where [bytes-per-sector] is the number after the "*" in "cylinders of..."
| |
| | |
| (Working backwards from the knowledge that 32256 – which was a Magic Number found by Tenebram – is the correct number, and trying to figure out why it is correct: If we presume that "sectors/track" means the number of sectors per track for a ''single head'', then 4032 (which is 64 x 63) must be the number of sectors per track for ''all'' heads, and 512 is probably the sector size in bytes. The offset to a given sector, then (waving a magic wand at all this so that it matches reality somehow) is [start] x [bytes-per-sector] x [sectors-per-track] – which leads us to deduce that the units for the [start] number must be "tracks".)
| |
| ===Accelerator===
| |
| For [[linux]] host systems, there is a loadable kernel module (called [[kqemu]]) that will allow qemu to run at near native speeds. At the time of this writing, there aren't distributed packages available with the module built, so you'll need to download the source from the website and compile it locally.
| |
| | |
| First download the [http://fabrice.bellard.free.fr/qemu/qemu-0.7.0.tar.gz qemu source] and [[untar]] it. Then download the [http://fabrice.bellard.free.fr/qemu/kqemu-0.6.2-1.tar.gz kqemu source] and [[untar]] it within the qemu source directory. Then run ./configure && make && sudo make install. You might also want to install the vgabios package from your package manager.
| |
| | |
| '''Editor's note''': I had this -- "If you're wanting to run [[Windows 98]] under qemu, this option is moot because kqemu and Win98 don't get along." written here, but I think that only applies to [[kqemu]] and maybe [[qemu-fast]] (I'm not clear on what the difference is between the two).
| |
Computing: Emulators: Qemu
Qemu is an open source processor emulator. It emulates a variety of different CPUs and systems, and achieves good speed by using dynamic translation.
Reference
Articles
