User:Woozle/toot.cat/2018/04/07

Take 1

Loosely following these instructions...

I just do everything in root rather than using sudo, because that's how I roll.

Things done:

• Create droplet (4GB- 2CPU - 80GB - $20, Ubuntu 16.04, SFO2, IPv6, Gonzo key)
• apt update
• apt upgrade
• install node.js:
  • curl -sL https://deb.nodesource.com/setup_6.x | sudo bash -
  • apt install imagemagick ffmpeg libpq-dev libxml2-dev libxslt1-dev nodejs
  • npm install -g yarn
• install redis-server:
  • apt install redis-server redis-tools
• install PostgreSQL (Pg):
  • apt install postgresql postgresql-contrib
• switch to postgres user, create Mastodon user in Pg:
  • su - postgres
  • psql
  • CREATE USER mastodon CREATEDB;
  • \q

Now, we're trying to enable ident auth in Pg so users can log in without a password.

• I don't understand why we want to do this; seems like bad security.
• I tried to do this bit exactly as written, because it looked like it might be user-sensitive, but it didn't work (see below).
• Can this be done as all one line?

• sudo sed -i '/^local.*postgres.*peer$/a host all all 127.0.0.1/32 ident' \
• /etc/postgresql/9.?/main/pg_hba.conf

That didn't work, because after the second line it asked for a password for postgres, which I don't have, and wouldn't accept a blank. So, backing out and trying as root (and all one line):

• sed -i '/^local.*postgres.*peer$/a host all all 127.0.0.1/32 ident' /etc/postgresql/9.?/main/pg_hba.conf

No error, but also no success message. I will assume successful.

• install ident daemon:
  • apt install pidentd
  • systemctl enable pidentd
  • Response:
    • pidentd.service is not a native service, redirecting to systemd-sysv-install
    • Executing /lib/systemd/systemd-sysv-install enable pidentd
  • systemctl start pidentd
  • systemctl restart postgresql

Setting Up Ruby

• apt install autoconf bison build-essential libssl-dev libyaml-dev libreadline6-dev zlib1g-dev libncurses5-dev libffi-dev libgdbm3 libgdbm-dev rbenv
  • Note: the instructions omitted rbenv, but it seems to be needed.
• adduser --disabled-password --disabled-login mastodon
  • Just hitting ENTER in response to all questions, "Y" in response to "Y/n".
• Change to user mastodon (which also puts you in /home/mastodon):
  • su - mastodon
• git clone https://github.com/rbenv/ruby-build.git ~/.rbenv/plugins/ruby-build
• install Ruby 2.4.1:
  • rbenv install 2.4.1

That didn't work because rbenv was not installed. (Also not sure this is the best version of Ruby, anymore, but that seems fixable later now that we have the command). So I had to back out to root, apt install rbenv, and then su - mastodon again.

• rbenv install 2.4.1
  • This takes a couple of minutes.
• rbenv global 2.4.1
  • This is instantaneous.
• ruby -v
  • response: ruby 2.3.1p112 (2016-04-26) [x86_64-linux-gnu]
    • ...um, okay.

Installing Mastodon

• cd ~
  • This is probably redundant.
• git clone https://github.com/tootsuite/mastodon.git live
• cd live
• git checkout $(git tag | tail -n 1)
  • I don't know what this does.
• "Install bundler to manage the dependencies and disable the gem documentation."
  • echo "gem: --no-document" > ~/.gemrc
  • gem install bundler --no-ri
    • Response:
      • Fetching: bundler-1.16.1.gem (100%)
      • ERROR: While executing gem ... (Gem::FilePermissionError)
      • You don't have write permissions for the /var/lib/gems/2.3.0 directory.

Okay, Simon says...

• exit
• gem install bundler --no-ri
  • Response:
    • Fetching: bundler-1.16.1.gem (100%)
    • Successfully installed bundler-1.16.1
    • 1 gem installed
• su - mastodon
• cd live
• bundle install --deployment --without development test
  • A bunch of stuff happened, and then this error message:

Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

    current directory: /home/mastodon/live/vendor/bundle/ruby/2.3.0/gems/nokogiri-1.8.2/ext/nokogiri
/usr/bin/ruby2.3 -r ./siteconf20180407-2653-idvqpi.rb extconf.rb
mkmf.rb can't find header files for ruby at /usr/lib/ruby/include/ruby.h

extconf failed, exit code 1

Gem files will remain installed in /home/mastodon/live/vendor/bundle/ruby/2.3.0/gems/nokogiri-1.8.2 for inspection.
Results logged to /home/mastodon/live/vendor/bundle/ruby/2.3.0/extensions/x86_64-linux/2.3.0/nokogiri-1.8.2/gem_make.out

An error occurred while installing nokogiri (1.8.2), and Bundler cannot continue.
Make sure that `gem install nokogiri -v '1.8.2'` succeeds before bundling.

In Gemfile:
  rails-settings-cached was resolved to 0.6.6, which depends on
    rails was resolved to 5.1.4, which depends on
      actioncable was resolved to 5.1.4, which depends on
        actionpack was resolved to 5.1.4, which depends on
          actionview was resolved to 5.1.4, which depends on
            rails-dom-testing was resolved to 2.0.3, which depends on
              nokogiri

Okay, trying that command...

• gem install nokogiri -v '1.8.2'
  • Response:
    • Fetching: mini_portile2-2.3.0.gem (100%)
    • ERROR: While executing gem ... (Gem::FilePermissionError)
    • You don't have write permissions for the /var/lib/gems/2.3.0 directory.

So again, Simon says...

• exit
• gem install nokogiri -v '1.8.2'
  • Response:

Fetching: mini_portile2-2.3.0.gem (100%)
Successfully installed mini_portile2-2.3.0
Fetching: nokogiri-1.8.2.gem (100%)
Building native extensions.  This could take a while...
ERROR:  Error installing nokogiri:
	ERROR: Failed to build gem native extension.

    current directory: /var/lib/gems/2.3.0/gems/nokogiri-1.8.2/ext/nokogiri
/usr/bin/ruby2.3 -r ./siteconf20180407-2736-1uhzyd6.rb extconf.rb
mkmf.rb can't find header files for ruby at /usr/lib/ruby/include/ruby.h

extconf failed, exit code 1

Gem files will remain installed in /var/lib/gems/2.3.0/gems/nokogiri-1.8.2 for inspection.
Results logged to /var/lib/gems/2.3.0/extensions/x86_64-linux/2.3.0/nokogiri-1.8.2/gem_make.out

Okay. Let's start over, and use the official instructions this time, leaving off any bits that have already clearly been done. (I don't know why I didn't use them to begin with... I guess these alternate instructions just looked so distro-specific and friendly.)

Take 2

As root...

• cd /root
• mkdir setup
• cd setup
• wget https://deb.nodesource.com/setup_6.x
• ...and then "review the script" using less -- as if I'd know how to evaluate it. Glanced at it, what does it mean. Now running it...
• bash setup_6.x

Yarn Repository

• apt -y install curl
  • was already installed, but might not have been if I hadn't tried the other instructions first
• curl -sS https://dl.yarnpkg.com/debian/pubkey.gpg | apt-key add -
• echo "deb https://dl.yarnpkg.com/debian/ stable main" | tee /etc/apt/sources.list.d/yarn.list
• apt update
• Install Yarn plus a bunch of other stuff:
  • apt -y install imagemagick ffmpeg libpq-dev libxml2-dev libxslt1-dev file git g++ libprotobuf-dev protobuf-compiler pkg-config nodejs gcc autoconf bison build-essential libssl-dev libyaml-dev libreadline6-dev zlib1g-dev libncurses5-dev libffi-dev libgdbm3 libgdbm-dev nginx redis-server redis-tools postgresql postgresql-contrib nginx letsencrypt yarn

User-Specific Stuff

• su - mastodon
• git clone https://github.com/rbenv/rbenv.git ~/.rbenv
  • This does not seem to have been done earlier, or at least not with the same command -- but there is a .rbenv folder. So can't do it again, unless we want to erase it. Maybe later, if something seems to be wrong with rbenv.
• cd ~/.rbenv && src/configure && make -C src
  • Response: -su: src/configure: No such file or directory
  • Okay, something seems to be wrong with rbenv.
• cd ~
• rm -rdf .rbenv
• git clone https://github.com/rbenv/rbenv.git ~/.rbenv
• cd ~/.rbenv && src/configure && make -C src
• echo 'export PATH="$HOME/.rbenv/bin:$PATH"' >> ~/.bashrc
• echo 'eval "$(rbenv init -)"' >> ~/.bashrc
• Restart the shell:
  • exec bash
• Check if rbenv is correctly installed:
  • type rbenv
    • Response:

rbenv is a function rbenv () {

   local command;
   command="${1:-}";
   if [ "$#" -gt 0 ]; then
       shift;
   fi;
   case "$command" in 
       rehash | shell)
           eval "$(rbenv "sh-$command" "$@")"
       ;;
       *)
           command rbenv "$command" "$@"
       ;;
   esac

}

• Install ruby-build as rbenv plugin:
  • git clone https://github.com/rbenv/ruby-build.git ~/.rbenv/plugins/ruby-build
• rbenv install 2.4.1
  • This is probably redundant now, but why not.
  • It still takes a couple of minutes, though.
• rbenv global 2.4.1

Installing Mastodon

Much of this has already been done -- but this instruction set does explain it a bit. Skipping redundant bits...

• Install bundler (again, but without the options):
  • gem install bundler
• Use bundler to install the rest of the Ruby dependencies (this might be redundant, but maybe not):
  • bundle install --deployment --without development test
    • Response: Could not locate Gemfile

I have to stop for tonight.

(resuming on 2018-04-09)

Looks like Gemfile is an app-config file which needs to already exist when you run bundle install [...] -- and there's one in /home/mastodon/live, so let's run it from there.

Log in as root, then:

• su - mastodon
• cd live
• bundle install --deployment --without development test
  • Response: rbenv: version `2.5.0' is not installed (set by /home/mastodon/live/.ruby-version)

Looks like the instructions may not have been updated; Charlotte tells me that Masto does, in fact, now require Ruby 2.5.0. So...

• cd ~
• rbenv install 2.5.0
• rbenv global 2.5.0
• cd live
• bundle install --deployment --without development test
  • Response:

    rbenv: bundle: command not found

The `bundle' command exists in these Ruby versions:

 2.4.1

I'm going on the assumption that this doesn't mean "Ruby did away with Bundler after 2.4.1" but rather "You haven't installed it for 2.5.0, you've only installed it for 2.4.1".

We're already in ~/live, which seems to be the right folder, so no need to cd there.

• gem install bundler

still working on this; saving work so far