wget (manpage)

from HTYP, the free directory anyone can edit if they can prove to me that they're not a spambot
Jump to navigation Jump to search

computing: software: documentation: manpages: wgetm

This article is in need of editing attention:
Reformatting from manpage transcription is incomplete.

wget is a command-line (CLI) utility for downloading pages and files from the web.

Manpage

NAME

wget - The non-interactive network downloader.

SYNOPSIS

  1. REDIRECT Template:arg/opt...
  2. REDIRECT Template:fmt/arg/opt...

DESCRIPTION

GNU Wget is a free utility for non-interactive download of files from the Web. It supports HTTP, HTTPS, and FTP protocols, as well as retrieval through HTTP proxies.

Wget is non-interactive, meaning that it can work in the background, while the user is not logged on. This allows you to start a retrieval and disconnect from the system, letting Wget finish the work. By contrast, most of the Web browsers require constant user's presence, which can be a great hindrance when transferring a lot of data.

Wget can follow links in HTML and XHTML pages and create local versions of remote web sites, fully recreating the directory structure of the original site. This is sometimes referred to as ``recursive downloading. While doing that, Wget respects the Robot Exclusion Standard (/robots.txt). Wget can be instructed to convert the links in downloaded HTML files to the local files for offline viewing.

Wget has been designed for robustness over slow or unstable network connections; if a download fails due to a network problem, it will keep retrying until the whole file has been retrieved. If the server supports regetting, it will instruct the server to continue the download from where it left off.

OPTIONS

Basic Startup Options

      -V
      --version
          Display the version of Wget.
      -h
      --help
          Print a help message describing all of Wget's command-line options.
      -b
      --background
          Go to background immediately after startup.  If no output file is specified via the -o, output is redirected to
          wget-log.
      -e command
      --execute command
          Execute command as if it were a part of .wgetrc.  A command thus invoked will be executed after the commands in
          .wgetrc, thus taking precedence over them.

Logging and Input File Options

      -o logfile
      --output-file=logfile
          Log all messages to logfile.  The messages are normally reported to standard error.
      -a logfile
      --append-output=logfile
          Append to logfile.  This is the same as -o, only it appends to logfile instead of overwriting the old log file.
          If logfile does not exist, a new file is created.
      -d
      --debug
          Turn on debug output, meaning various information important to the developers of Wget if it does not work prop-
          erly.  Your system administrator may have chosen to compile Wget without debug support, in which case -d will not
          work.  Please note that compiling with debug support is always safe---Wget compiled with the debug support will
          not print any debug info unless requested with -d.
      -q
      --quiet
          Turn off Wget's output.
      -v
      --verbose
          Turn on verbose output, with all the available data.  The default output is verbose.
      -nv
      --non-verbose
          Non-verbose output---turn off verbose without being completely quiet (use -q for that), which means that error
          messages and basic information still get printed.
      -i file
      --input-file=file
          Read URLs from file, in which case no URLs need to be on the command line.  If there are URLs both on the command
          line and in an input file, those on the command lines will be the first ones to be retrieved.  The file need not
          be an HTML document (but no harm if it is)---it is enough if the URLs are just listed sequentially.
          However, if you specify --force-html, the document will be regarded as html.  In that case you may have problems
          with relative links, which you can solve either by adding "<base href="url">" to the documents or by specifying
          --base=url on the command line.
      -F
      --force-html
          When input is read from a file, force it to be treated as an HTML file.  This enables you to retrieve relative
          links from existing HTML files on your local disk, by adding "<base href="url">" to HTML, or using the --base
          command-line option.
      -B URL
      --base=URL
          When used in conjunction with -F, prepends URL to relative links in the file specified by -i.

Download Options

      --bind-address=ADDRESS
          When making client TCP/IP connections, "bind()" to ADDRESS on the local machine.  ADDRESS may be specified as a
          hostname or IP address.  This option can be useful if your machine is bound to multiple IPs.
      -t number
      --tries=number
          Set number of retries to number.  Specify 0 or inf for infinite retrying.  The default is to retry 20 times, with
          the exception of fatal errors like ``connection refused or ``not found (404), which are not retried.
      -O file
      --output-document=file
          The documents will not be written to the appropriate files, but all will be concatenated together and written to
          file.  If file already exists, it will be overwritten.  If the file is -, the documents will be written to stan-
          dard output.  Including this option automatically sets the number of tries to 1. Note that when --output-document
          is specified, --convert-links is ignored.
      -nc
      --no-clobber
          If a file is downloaded more than once in the same directory, Wget's behavior depends on a few options, including
          -nc.  In certain cases, the local file will be clobbered, or overwritten, upon repeated download.  In other cases
          it will be preserved.
          When running Wget without -N, -nc, or -r, downloading the same file in the same directory will result in the
          original copy of file being preserved and the second copy being named file.1.  If that file is downloaded yet
          again, the third copy will be named file.2, and so on.  When -nc is specified, this behavior is suppressed, and
          Wget will refuse to download newer copies of file.  Therefore, ``"no-clobber" is actually a misnomer in this
          mode---it's not clobbering that's prevented (as the numeric suffixes were already preventing clobbering), but
          rather the multiple version saving that's prevented.
          When running Wget with -r, but without -N or -nc, re-downloading a file will result in the new copy simply over-
          writing the old.  Adding -nc will prevent this behavior, instead causing the original version to be preserved and
          any newer copies on the server to be ignored.
          When running Wget with -N, with or without -r, the decision as to whether or not to download a newer copy of a
          file depends on the local and remote timestamp and size of the file.  -nc may not be specified at the same time
          as -N.
          Note that when -nc is specified, files with the suffixes .html or (yuck) .htm will be loaded from the local disk
          and parsed as if they had been retrieved from the Web.
      -c
      --continue
          Continue getting a partially-downloaded file.  This is useful when you want to finish up a download started by a
          previous instance of Wget, or by another program.  For instance:
                  wget -c ftp://sunsite.doc.ic.ac.uk/ls-lR.Z
          If there is a file named ls-lR.Z in the current directory, Wget will assume that it is the first portion of the
          remote file, and will ask the server to continue the retrieval from an offset equal to the length of the local
          file.
          Note that you don't need to specify this option if you just want the current invocation of Wget to retry down-
          loading a file should the connection be lost midway through.  This is the default behavior.  -c only affects
          resumption of downloads started prior to this invocation of Wget, and whose local files are still sitting around.
          Without -c, the previous example would just download the remote file to ls-lR.Z.1, leaving the truncated ls-lR.Z
          file alone.
          Beginning with Wget 1.7, if you use -c on a non-empty file, and it turns out that the server does not support
          continued downloading, Wget will refuse to start the download from scratch, which would effectively ruin existing
          contents.  If you really want the download to start from scratch, remove the file.
          Also beginning with Wget 1.7, if you use -c on a file which is of equal size as the one on the server, Wget will
          refuse to download the file and print an explanatory message.  The same happens when the file is smaller on the
          server than locally (presumably because it was changed on the server since your last download attempt)---because
          ``continuing is not meaningful, no download occurs.
          On the other side of the coin, while using -c, any file that's bigger on the server than locally will be consid-
          ered an incomplete download and only "(length(remote) - length(local))" bytes will be downloaded and tacked onto
          the end of the local file.  This behavior can be desirable in certain cases---for instance, you can use wget -c
          to download just the new portion that's been appended to a data collection or log file.
          However, if the file is bigger on the server because it's been changed, as opposed to just appended to, you'll
          end up with a garbled file.  Wget has no way of verifying that the local file is really a valid prefix of the
          remote file.  You need to be especially careful of this when using -c in conjunction with -r, since every file
          will be considered as an "incomplete download" candidate.
          Another instance where you'll get a garbled file if you try to use -c is if you have a lame HTTP proxy that
          inserts a ``transfer interrupted string into the local file.  In the future a ``rollback option may be added
          to deal with this case.
          Note that -c only works with FTP servers and with HTTP servers that support the "Range" header.
      --progress=type
          Select the type of the progress indicator you wish to use.  Legal indicators are ``dot and ``bar.
          The ``bar indicator is used by default.  It draws an ASCII progress bar graphics (a.k.a ``thermometer dis-
          play) indicating the status of retrieval.  If the output is not a TTY, the ``dot bar will be used by default.
          Use --progress=dot to switch to the ``dot display.  It traces the retrieval by printing dots on the screen,
          each dot representing a fixed amount of downloaded data.
          When using the dotted retrieval, you may also set the style by specifying the type as dot:style.  Different
          styles assign different meaning to one dot.  With the "default" style each dot represents 1K, there are ten dots
          in a cluster and 50 dots in a line.  The "binary" style has a more ``computer-like orientation---8K dots,
          16-dots clusters and 48 dots per line (which makes for 384K lines).  The "mega" style is suitable for downloading
          very large files---each dot represents 64K retrieved, there are eight dots in a cluster, and 48 dots on each line
          (so each line contains 3M).
          Note that you can set the default style using the "progress" command in .wgetrc.  That setting may be overridden
          from the command line.  The exception is that, when the output is not a TTY, the ``dot progress will be favored
          over ``bar.  To force the bar output, use --progress=bar:force.
      -N
      --timestamping
          Turn on time-stamping.
      -S
      --server-response
          Print the headers sent by HTTP servers and responses sent by FTP servers.
      --spider
          When invoked with this option, Wget will behave as a Web spider, which means that it will not download the pages,
          just check that they are there.  For example, you can use Wget to check your bookmarks:
                  wget --spider --force-html -i bookmarks.html
          This feature needs much more work for Wget to get close to the functionality of real web spiders.
      -T seconds
      --timeout=seconds
          Set the network timeout to seconds seconds.  This is equivalent to specifying --dns-timeout, --connect-timeout,
          and --read-timeout, all at the same time.
          Whenever Wget connects to or reads from a remote host, it checks for a timeout and aborts the operation if the
          time expires.  This prevents anomalous occurrences such as hanging reads or infinite connects.  The only timeout
          enabled by default is a 900-second timeout for reading.  Setting timeout to 0 disables checking for timeouts.
          Unless you know what you are doing, it is best not to set any of the timeout-related options.
      --dns-timeout=seconds
          Set the DNS lookup timeout to seconds seconds.  DNS lookups that don't complete within the specified time will
          fail.  By default, there is no timeout on DNS lookups, other than that implemented by system libraries.
      --connect-timeout=seconds
          Set the connect timeout to seconds seconds.  TCP connections that take longer to establish will be aborted.  By
          default, there is no connect timeout, other than that implemented by system libraries.
      --read-timeout=seconds
          Set the read (and write) timeout to seconds seconds.  Reads that take longer will fail.  The default value for
          read timeout is 900 seconds.
      --limit-rate=amount
          Limit the download speed to amount bytes per second.  Amount may be expressed in bytes, kilobytes with the k suf-
          fix, or megabytes with the m suffix.  For example, --limit-rate=20k will limit the retrieval rate to 20KB/s.
          This kind of thing is useful when, for whatever reason, you don't want Wget to consume the entire available band-
          width.
          Note that Wget implements the limiting by sleeping the appropriate amount of time after a network read that took
          less time than specified by the rate.  Eventually this strategy causes the TCP transfer to slow down to approxi-
          mately the specified rate.  However, it may take some time for this balance to be achieved, so don't be surprised
          if limiting the rate doesn't work well with very small files.
      -w seconds
      --wait=seconds
          Wait the specified number of seconds between the retrievals.  Use of this option is recommended, as it lightens
          the server load by making the requests less frequent.  Instead of in seconds, the time can be specified in min-
          utes using the "m" suffix, in hours using "h" suffix, or in days using "d" suffix.
          Specifying a large value for this option is useful if the network or the destination host is down, so that Wget
          can wait long enough to reasonably expect the network error to be fixed before the retry.
      --waitretry=seconds
          If you don't want Wget to wait between every retrieval, but only between retries of failed downloads, you can use
          this option.  Wget will use linear backoff, waiting 1 second after the first failure on a given file, then wait-
          ing 2 seconds after the second failure on that file, up to the maximum number of seconds you specify.  Therefore,
          a value of 10 will actually make Wget wait up to (1 + 2 + ... + 10) = 55 seconds per file.
          Note that this option is turned on by default in the global wgetrc file.
      --random-wait
          Some web sites may perform log analysis to identify retrieval programs such as Wget by looking for statistically
          significant similarities in the time between requests. This option causes the time between requests to vary
          between 0 and 2 * wait seconds, where wait was specified using the --wait option, in order to mask Wget's pres-
          ence from such analysis.
          A recent article in a publication devoted to development on a popular consumer platform provided code to perform
          this analysis on the fly.  Its author suggested blocking at the class C address level to ensure automated
          retrieval programs were blocked despite changing DHCP-supplied addresses.
          The --random-wait option was inspired by this ill-advised recommendation to block many unrelated users from a web
          site due to the actions of one.
      -Y on/off
      --proxy=on/off
          Turn proxy support on or off.  The proxy is on by default if the appropriate environment variable is defined.
          For more information about the use of proxies with Wget,
      -Q quota
      --quota=quota
          Specify download quota for automatic retrievals.  The value can be specified in bytes (default), kilobytes (with
          k suffix), or megabytes (with m suffix).
          Note that quota will never affect downloading a single file.  So if you specify wget -Q10k
          ftp://wuarchive.wustl.edu/ls-lR.gz, all of the ls-lR.gz will be downloaded.  The same goes even when several URLs
          are specified on the command-line.  However, quota is respected when retrieving either recursively, or from an
          input file.  Thus you may safely type wget -Q2m -i sites---download will be aborted when the quota is exceeded.
          Setting quota to 0 or to inf unlimits the download quota.
      --dns-cache=off
          Turn off caching of DNS lookups.  Normally, Wget remembers the addresses it looked up from DNS so it doesn't have
          to repeatedly contact the DNS server for the same (typically small) set of addresses it retrieves from.  This
          cache exists in memory only; a new Wget run will contact DNS again.
          However, in some cases it is not desirable to cache host names, even for the duration of a short-running applica-
          tion like Wget.  For example, some HTTP servers are hosted on machines with dynamically allocated IP addresses
          that change from time to time.  Their DNS entries are updated along with each change.  When Wget's download from
          such a host gets interrupted by IP address change, Wget retries the download, but (due to DNS caching) it con-
          tacts the old address.  With the DNS cache turned off, Wget will repeat the DNS lookup for every connect and will
          thus get the correct dynamic address every time---at the cost of additional DNS lookups where they're probably
          not needed.
          If you don't understand the above description, you probably won't need this option.
      --restrict-file-names=mode
          Change which characters found in remote URLs may show up in local file names generated from those URLs.  Charac-
          ters that are restricted by this option are escaped, i.e. replaced with %HH, where HH is the hexadecimal number
          that corresponds to the restricted character.
          By default, Wget escapes the characters that are not valid as part of file names on your operating system, as
          well as control characters that are typically unprintable.  This option is useful for changing these defaults,
          either because you are downloading to a non-native partition, or because you want to disable escaping of the con-
          trol characters.
          When mode is set to ``unix, Wget escapes the character / and the control characters in the ranges 0--31 and
          128--159.  This is the default on Unix-like OS'es.
          When mode is set to ``windows, Wget escapes the characters \, |, /, :, ?, ", *, <, >, and the control charac-
          ters in the ranges 0--31 and 128--159.  In addition to this, Wget in Windows mode uses + instead of : to separate
          host and port in local file names, and uses @} instead of @samp{? to separate the query portion of the file name
          from the rest.  Therefore, a URL that would be saved as www.xemacs.org:4300/search.pl?input=blah in Unix mode
          would be saved as www.xemacs.org+4300/search.pl@input=blah in Windows mode.  This mode is the default on Windows.
          If you append ,nocontrol to the mode, as in unix,nocontrol, escaping of the control characters is also switched
          off.  You can use --restrict-file-names=nocontrol to turn off escaping of control characters without affecting
          the choice of the OS to use as file name restriction mode.

Directory Options

      -nd
      --no-directories
          Do not create a hierarchy of directories when retrieving recursively.  With this option turned on, all files will
          get saved to the current directory, without clobbering (if a name shows up more than once, the filenames will get
          extensions .n).
      -x
      --force-directories
          The opposite of -nd---create a hierarchy of directories, even if one would not have been created otherwise.  E.g.
          wget -x http://fly.srk.fer.hr/robots.txt will save the downloaded file to fly.srk.fer.hr/robots.txt.
      -nH
      --no-host-directories
          Disable generation of host-prefixed directories.  By default, invoking Wget with -r http://fly.srk.fer.hr/ will
          create a structure of directories beginning with fly.srk.fer.hr/.  This option disables such behavior.
      --cut-dirs=number
          Ignore number directory components.  This is useful for getting a fine-grained control over the directory where
          recursive retrieval will be saved.
          Take, for example, the directory at ftp://ftp.xemacs.org/pub/xemacs/.  If you retrieve it with -r, it will be
          saved locally under ftp.xemacs.org/pub/xemacs/.  While the -nH option can remove the ftp.xemacs.org/ part, you
          are still stuck with pub/xemacs.  This is where --cut-dirs comes in handy; it makes Wget not ``see number
          remote directory components.  Here are several examples of how --cut-dirs option works.
                  No options        -> ftp.xemacs.org/pub/xemacs/
                  -nH               -> pub/xemacs/
                  -nH --cut-dirs=1  -> xemacs/
                  -nH --cut-dirs=2  -> .
                  --cut-dirs=1      -> ftp.xemacs.org/xemacs/
                  ...
          If you just want to get rid of the directory structure, this option is similar to a combination of -nd and -P.
          However, unlike -nd, --cut-dirs does not lose with subdirectories---for instance, with -nH --cut-dirs=1, a beta/
          subdirectory will be placed to xemacs/beta, as one would expect.
      -P prefix
      --directory-prefix=prefix
          Set directory prefix to prefix.  The directory prefix is the directory where all other files and subdirectories
          will be saved to, i.e. the top of the retrieval tree.  The default is . (the current directory).

HTTP Options

      -E
      --html-extension
          If a file of type application/xhtml+xml or text/html is downloaded and the URL does not end with the regexp
          \.[Hh][Tt][Mm][Ll]?, this option will cause the suffix .html to be appended to the local filename.  This is use-
          ful, for instance, when you're mirroring a remote site that uses .asp pages, but you want the mirrored pages to
          be viewable on your stock Apache server.  Another good use for this is when you're downloading CGI-generated
          materials.  A URL like http://site.com/article.cgi?25 will be saved as article.cgi?25.html.
          Note that filenames changed in this way will be re-downloaded every time you re-mirror a site, because Wget can't
          tell that the local X.html file corresponds to remote URL X (since it doesn't yet know that the URL produces out-
          put of type text/html or application/xhtml+xml.  To prevent this re-downloading, you must use -k and -K so that
          the original version of the file will be saved as X.orig.
      --http-user=user
      --http-passwd=password
          Specify the username user and password password on an HTTP server.  According to the type of the challenge, Wget
          will encode them using either the "basic" (insecure) or the "digest" authentication scheme.
          Another way to specify username and password is in the URL itself.  Either method reveals your password to anyone
          who bothers to run "ps".  To prevent the passwords from being seen, store them in .wgetrc or .netrc, and make
          sure to protect those files from other users with "chmod".  If the passwords are really important, do not leave
          them lying in those files either---edit the files and delete them after Wget has started the download.
          For more information about security issues with Wget, (editor's note: the manpage text is in fact cut off here.)
      -C on/off
      --cache=on/off
          When set to off, disable server-side cache.  In this case, Wget will send the remote server an appropriate direc-
          tive (Pragma: no-cache) to get the file from the remote service, rather than returning the cached version.  This
          is especially useful for retrieving and flushing out-of-date documents on proxy servers.
          Caching is allowed by default.
      --cookies=on/off
          When set to off, disable the use of cookies.  Cookies are a mechanism for maintaining server-side state.  The
          server sends the client a cookie using the "Set-Cookie" header, and the client responds with the same cookie upon
          further requests.  Since cookies allow the server owners to keep track of visitors and for sites to exchange this
          information, some consider them a breach of privacy.  The default is to use cookies; however, storing cookies is
          not on by default.
      --load-cookies file
          Load cookies from file before the first HTTP retrieval.  file is a textual file in the format originally used by
          Netscape's cookies.txt file.
          You will typically use this option when mirroring sites that require that you be logged in to access some or all
          of their content.  The login process typically works by the web server issuing an HTTP cookie upon receiving and
          verifying your credentials.  The cookie is then resent by the browser when accessing that part of the site, and
          so proves your identity.
          Mirroring such a site requires Wget to send the same cookies your browser sends when communicating with the site.
          This is achieved by --load-cookies---simply point Wget to the location of the cookies.txt file, and it will send
          the same cookies your browser would send in the same situation.  Different browsers keep textual cookie files in
          different locations:
          @asis<Netscape 4.x.>
              The cookies are in ~/.netscape/cookies.txt.
          @asis<Mozilla and Netscape 6.x.>
              Mozilla's cookie file is also named cookies.txt, located somewhere under ~/.mozilla, in the directory of your
              profile.  The full path usually ends up looking somewhat like ~/.mozilla/default/some-weird-string/cook-
              ies.txt.
          @asis<Internet Explorer.>
              You can produce a cookie file Wget can use by using the File menu, Import and Export, Export Cookies.  This
              has been tested with Internet Explorer 5; it is not guaranteed to work with earlier versions.
          @asis<Other browsers.>
              If you are using a different browser to create your cookies, --load-cookies will only work if you can locate
              or produce a cookie file in the Netscape format that Wget expects.
          If you cannot use --load-cookies, there might still be an alternative.  If your browser supports a ``cookie
          manager, you can use it to view the cookies used when accessing the site you're mirroring.  Write down the name
          and value of the cookie, and manually instruct Wget to send those cookies, bypassing the ``official cookie sup-
          port:
                  wget --cookies=off --header "Cookie: <name>=<value>"
      --save-cookies file
          Save cookies to file at the end of session.  Cookies whose expiry time is not specified, or those that have
          already expired, are not saved.
      --ignore-length
          Unfortunately, some HTTP servers (CGI programs, to be more precise) send out bogus "Content-Length" headers,
          which makes Wget go wild, as it thinks not all the document was retrieved.  You can spot this syndrome if Wget
          retries getting the same document again and again, each time claiming that the (otherwise normal) connection has
          closed on the very same byte.
          With this option, Wget will ignore the "Content-Length" header---as if it never existed.
      --header=additional-header
          Define an additional-header to be passed to the HTTP servers.  Headers must contain a : preceded by one or more
          non-blank characters, and must not contain newlines.
          You may define more than one additional header by specifying --header more than once.
                  wget --header='Accept-Charset: iso-8859-2' \
                       --header='Accept-Language: hr'        \
                         http://fly.srk.fer.hr/
          Specification of an empty string as the header value will clear all previous user-defined headers.
      --proxy-user=user
      --proxy-passwd=password
          Specify the username user and password password for authentication on a proxy server.  Wget will encode them
          using the "basic" authentication scheme.
          Security considerations similar to those with --http-passwd pertain here as well.
      --referer=url
          Include `Referer: url' header in HTTP request.  Useful for retrieving documents with server-side processing that
          assume they are always being retrieved by interactive web browsers and only come out properly when Referer is set
          to one of the pages that point to them.
      -s
      --save-headers
          Save the headers sent by the HTTP server to the file, preceding the actual contents, with an empty line as the
          separator.
      -U agent-string
      --user-agent=agent-string
          Identify as agent-string to the HTTP server.
          The HTTP protocol allows the clients to identify themselves using a "User-Agent" header field.  This enables dis-
          tinguishing the WWW software, usually for statistical purposes or for tracing of protocol violations.  Wget nor-
          mally identifies as Wget/version, version being the current version number of Wget.
          However, some sites have been known to impose the policy of tailoring the output according to the
          "User-Agent"-supplied information.  While conceptually this is not such a bad idea, it has been abused by servers
          denying information to clients other than "Mozilla" or Microsoft "Internet Explorer".  This option allows you to
          change the "User-Agent" line issued by Wget.  Use of this option is discouraged, unless you really know what you
          are doing.
      --post-data=string
      --post-file=file
          Use POST as the method for all HTTP requests and send the specified data in the request body.  "--post-data"
          sends string as data, whereas "--post-file" sends the contents of file.  Other than that, they work in exactly
          the same way.
          Please be aware that Wget needs to know the size of the POST data in advance.  Therefore the argument to
          "--post-file" must be a regular file; specifying a FIFO or something like /dev/stdin won't work.  It's not quite
          clear how to work around this limitation inherent in HTTP/1.0.  Although HTTP/1.1 introduces chunked transfer
          that doesn't require knowing the request length in advance, a client can't use chunked unless it knows it's talk-
          ing to an HTTP/1.1 server.  And it can't know that until it receives a response, which in turn requires the
          request to have been completed -- a chicken-and-egg problem.
          Note: if Wget is redirected after the POST request is completed, it will not send the POST data to the redirected
          URL.  This is because URLs that process POST often respond with a redirection to a regular page (although that's
          technically disallowed), which does not desire or accept POST.  It is not yet clear that this behavior is opti-
          mal; if it doesn't work out, it will be changed.
          This example shows how to log to a server using POST and then proceed to download the desired pages, presumably
          only accessible to authorized users:
                  # Log in to the server.  This can be done only once.
                  wget --save-cookies cookies.txt \
                       --post-data 'user=foo&password=bar' \
                       http://server.com/auth.php
                  # Now grab the page or pages we care about.
                  wget --load-cookies cookies.txt \
                       -p http://server.com/interesting/article.php

FTP Options

      -nr
      --dont-remove-listing
          Don't remove the temporary .listing files generated by FTP retrievals.  Normally, these files contain the raw
          directory listings received from FTP servers.  Not removing them can be useful for debugging purposes, or when
          you want to be able to easily check on the contents of remote server directories (e.g. to verify that a mirror
          you're running is complete).
          Note that even though Wget writes to a known filename for this file, this is not a security hole in the scenario
          of a user making .listing a symbolic link to /etc/passwd or something and asking "root" to run Wget in his or her
          directory.  Depending on the options used, either Wget will refuse to write to .listing, making the glob-
          bing/recursion/time-stamping operation fail, or the symbolic link will be deleted and replaced with the actual
          .listing file, or the listing will be written to a .listing.number file.
          Even though this situation isn't a problem, though, "root" should never run Wget in a non-trusted user's direc-
          tory.  A user could do something as simple as linking index.html to /etc/passwd and asking "root" to run Wget
          with -N or -r so the file will be overwritten.
      -g on/off
      --glob=on/off
          Turn FTP globbing on or off.  Globbing means you may use the shell-like special characters (wildcards), like *,
          ?, [ and ] to retrieve more than one file from the same directory at once, like:
                  wget ftp://gnjilux.srk.fer.hr/*.msg
          By default, globbing will be turned on if the URL contains a globbing character.  This option may be used to turn
          globbing on or off permanently.
          You may have to quote the URL to protect it from being expanded by your shell.  Globbing makes Wget look for a
          directory listing, which is system-specific.  This is why it currently works only with Unix FTP servers (and the
          ones emulating Unix "ls" output).
      --passive-ftp
          Use the passive FTP retrieval scheme, in which the client initiates the data connection.  This is sometimes
          required for FTP to work behind firewalls.
      --retr-symlinks
          Usually, when retrieving FTP directories recursively and a symbolic link is encountered, the linked-to file is
          not downloaded.  Instead, a matching symbolic link is created on the local filesystem.  The pointed-to file will
          not be downloaded unless this recursive retrieval would have encountered it separately and downloaded it anyway.
          When --retr-symlinks is specified, however, symbolic links are traversed and the pointed-to files are retrieved.
          At this time, this option does not cause Wget to traverse symlinks to directories and recurse through them, but
          in the future it should be enhanced to do this.
          Note that when retrieving a file (not a directory) because it was specified on the command-line, rather than
          because it was recursed to, this option has no effect.  Symbolic links are always traversed in this case.

Recursive Retrieval Options

      -r
      --recursive
          Turn on recursive retrieving.
      -l depth
      --level=depth
          Specify recursion maximum depth level depth.  The default maximum depth is 5.
      --delete-after
          This option tells Wget to delete every single file it downloads, after having done so.  It is useful for pre-
          fetching popular pages through a proxy, e.g.:
                  wget -r -nd --delete-after http://whatever.com/~popular/page/
          The -r option is to retrieve recursively, and -nd to not create directories.
          Note that --delete-after deletes files on the local machine.  It does not issue the DELE command to remote FTP
          sites, for instance.  Also note that when --delete-after is specified, --convert-links is ignored, so .orig files
          are simply not created in the first place.
      -k
      --convert-links
          After the download is complete, convert the links in the document to make them suitable for local viewing.  This
          affects not only the visible hyperlinks, but any part of the document that links to external content, such as
          embedded images, links to style sheets, hyperlinks to non-HTML content, etc. Note that when --output-document is
          specified, --convert-links is ignored.
          Each link will be changed in one of the two ways:
          *   The links to files that have been downloaded by Wget will be changed to refer to the file they point to as a
              relative link.
              Example: if the downloaded file /foo/doc.html links to /bar/img.gif, also downloaded, then the link in
              doc.html will be modified to point to ../bar/img.gif.  This kind of transformation works reliably for arbi-
              trary combinations of directories.
          *   The links to files that have not been downloaded by Wget will be changed to include host name and absolute
              path of the location they point to.
              Example: if the downloaded file /foo/doc.html links to /bar/img.gif (or to ../bar/img.gif), then the link in
              doc.html will be modified to point to http://hostname/bar/img.gif.
          Because of this, local browsing works reliably: if a linked file was downloaded, the link will refer to its local
          name; if it was not downloaded, the link will refer to its full Internet address rather than presenting a broken
          link.  The fact that the former links are converted to relative links ensures that you can move the downloaded
          hierarchy to another directory.
          Note that only at the end of the download can Wget know which links have been downloaded.  Because of that, the
          work done by -k will be performed at the end of all the downloads.
      -K
      --backup-converted
          When converting a file, back up the original version with a .orig suffix.  Affects the behavior of -N.
      -m
      --mirror
          Turn on options suitable for mirroring.  This option turns on recursion and time-stamping, sets infinite recur-
          sion depth and keeps FTP directory listings.  It is currently equivalent to -r -N -l inf -nr.
      -p
      --page-requisites
          This option causes Wget to download all the files that are necessary to properly display a given HTML page.  This
          includes such things as inlined images, sounds, and referenced stylesheets.
          Ordinarily, when downloading a single HTML page, any requisite documents that may be needed to display it prop-
          erly are not downloaded.  Using -r together with -l can help, but since Wget does not ordinarily distinguish
          between external and inlined documents, one is generally left with ``leaf documents that are missing their req-
          uisites.
          For instance, say document 1.html contains an "<IMG>" tag referencing 1.gif and an "<A>" tag pointing to external
          document 2.html.  Say that 2.html is similar but that its image is 2.gif and it links to 3.html.  Say this con-
          tinues up to some arbitrarily high number.
          If one executes the command:
                  wget -r -l 2 http://<site>/1.html
          then 1.html, 1.gif, 2.html, 2.gif, and 3.html will be downloaded.  As you can see, 3.html is without its requi-
          site 3.gif because Wget is simply counting the number of hops (up to 2) away from 1.html in order to determine
          where to stop the recursion.  However, with this command:
                  wget -r -l 2 -p http://<site>/1.html
          all the above files and 3.html's requisite 3.gif will be downloaded.  Similarly,
                  wget -r -l 1 -p http://<site>/1.html
          will cause 1.html, 1.gif, 2.html, and 2.gif to be downloaded.  One might think that:
                  wget -r -l 0 -p http://<site>/1.html
          would download just 1.html and 1.gif, but unfortunately this is not the case, because -l 0 is equivalent to -l
          inf---that is, infinite recursion.  To download a single HTML page (or a handful of them, all specified on the
          command-line or in a -i URL input file) and its (or their) requisites, simply leave off -r and -l:
                  wget -p http://<site>/1.html
          Note that Wget will behave as if -r had been specified, but only that single page and its requisites will be
          downloaded.  Links from that page to external documents will not be followed.  Actually, to download a single
          page and all its requisites (even if they exist on separate websites), and make sure the lot displays properly
          locally, this author likes to use a few options in addition to -p:
                  wget -E -H -k -K -p http://<site>/<document>
          To finish off this topic, it's worth knowing that Wget's idea of an external document link is any URL specified
          in an "<A>" tag, an "<AREA>" tag, or a "<LINK>" tag other than "<LINK REL="stylesheet">".
      --strict-comments
          Turn on strict parsing of HTML comments.  The default is to terminate comments at the first occurrence of -->.
          According to specifications, HTML comments are expressed as SGML declarations.  Declaration is special markup
          that begins with <! and ends with >, such as <!DOCTYPE ...>, that may contain comments between a pair of --
          delimiters.  HTML comments are ``empty declarations, SGML declarations without any non-comment text.  There-
          fore,  is a valid comment, and so is , but  is not.
          On the other hand, most HTML writers don't perceive comments as anything other than text delimited with , which is not quite the same.  For example, something like  works as a valid comment as long
          as the number of dashes is a multiple of four (!).  If not, the comment technically lasts until the next --,
          which may be at the other end of the document.  Because of this, many popular browsers completely ignore the
          specification and implement what users have come to expect: comments delimited with .
          Until version 1.9, Wget interpreted comments strictly, which resulted in missing links in many web pages that
          displayed fine in browsers, but had the misfortune of containing non-compliant comments.  Beginning with version
          1.9, Wget has joined the ranks of clients that implements ``naive comments, terminating each comment at the
          first occurrence of -->.
          If, for whatever reason, you want strict comment parsing, use this option to turn it on.

Recursive Accept/Reject Options

      -A acclist --accept acclist
      -R rejlist --reject rejlist
          Specify comma-separated lists of file name suffixes or patterns to accept or reject (@pxref{Types of Files} for
          more details).
      -D domain-list
      --domains=domain-list
          Set domains to be followed.  domain-list is a comma-separated list of domains.  Note that it does not turn on -H.
      --exclude-domains domain-list
          Specify the domains that are not to be followed..
      --follow-ftp
          Follow FTP links from HTML documents.  Without this option, Wget will ignore all the FTP links.
      --follow-tags=list
          Wget has an internal table of HTML tag / attribute pairs that it considers when looking for linked documents dur-
          ing a recursive retrieval.  If a user wants only a subset of those tags to be considered, however, he or she
          should be specify such tags in a comma-separated list with this option.
      -G list
      --ignore-tags=list
          This is the opposite of the --follow-tags option.  To skip certain HTML tags when recursively looking for docu-
          ments to download, specify them in a comma-separated list.
          In the past, the -G option was the best bet for downloading a single page and its requisites, using a command-
          line like:
                  wget -Ga,area -H -k -K -r http://<site>/<document>
          However, the author of this option came across a page with tags like "<LINK REL="home" HREF="/">" and came to the
          realization that -G was not enough.  One can't just tell Wget to ignore "<LINK>", because then stylesheets will
          not be downloaded.  Now the best bet for downloading a single page and its requisites is the dedicated
          --page-requisites option.
      -H
      --span-hosts
          Enable spanning across hosts when doing recursive retrieving.
      -L
      --relative
          Follow relative links only.  Useful for retrieving a specific home page without any distractions, not even those
          from the same hosts.
      -I list
      --include-directories=list
          Specify a comma-separated list of directories you wish to follow when downloading (@pxref{Directory-Based Limits}
          for more details.)  Elements of list may contain wildcards.
      -X list
      --exclude-directories=list
          Specify a comma-separated list of directories you wish to exclude from download (@pxref{Directory-Based Limits}
          for more details.)  Elements of list may contain wildcards.
      -np
      --no-parent
          Do not ever ascend to the parent directory when retrieving recursively.  This is a useful option, since it guar-
          antees that only the files below a certain hierarchy will be downloaded.

FILES

      /etc/wgetrc
          Default location of the global startup file.
      .wgetrc
          User startup file.

BUGS

      You are welcome to send bug reports about GNU Wget to <bug-wget@gnu.org>.
      Before actually submitting a bug report, please try to follow a few simple guidelines.
      1.  Please try to ascertain that the behavior you see really is a bug.  If Wget crashes, it's a bug.  If Wget does
          not behave as documented, it's a bug.  If things work strange, but you are not sure about the way they are sup-
          posed to work, it might well be a bug.
      2.  Try to repeat the bug in as simple circumstances as possible.  E.g. if Wget crashes while downloading wget -rl0
          -kKE -t5 -Y0 http://yoyodyne.com -o /tmp/log, you should try to see if the crash is repeatable, and if will occur
          with a simpler set of options.  You might even try to start the download at the page where the crash occurred to
          see if that page somehow triggered the crash.
          Also, while I will probably be interested to know the contents of your .wgetrc file, just dumping it into the
          debug message is probably a bad idea.  Instead, you should first try to see if the bug repeats with .wgetrc moved
          out of the way.  Only if it turns out that .wgetrc settings affect the bug, mail me the relevant parts of the
          file.
      3.  Please start Wget with -d option and send the log (or the relevant parts of it).  If Wget was compiled without
          debug support, recompile it.  It is much easier to trace bugs with debug support on.
      4.  If Wget has crashed, try to run it in a debugger, e.g. "gdb `which wget` core" and type "where" to get the back-

FILES

      /etc/wgetrc
          Default location of the global startup file.
      .wgetrc
          User startup file.

BUGS

      You are welcome to send bug reports about GNU Wget to <bug-wget@gnu.org>.
      Before actually submitting a bug report, please try to follow a few simple guidelines.
      1.  Please try to ascertain that the behavior you see really is a bug.  If Wget crashes, it's a bug.  If Wget does
          not behave as documented, it's a bug.  If things work strange, but you are not sure about the way they are sup-
          posed to work, it might well be a bug.
      2.  Try to repeat the bug in as simple circumstances as possible.  E.g. if Wget crashes while downloading wget -rl0
          -kKE -t5 -Y0 http://yoyodyne.com -o /tmp/log, you should try to see if the crash is repeatable, and if will occur
          with a simpler set of options.  You might even try to start the download at the page where the crash occurred to
          see if that page somehow triggered the crash.
          Also, while I will probably be interested to know the contents of your .wgetrc file, just dumping it into the
          debug message is probably a bad idea.  Instead, you should first try to see if the bug repeats with .wgetrc moved
          out of the way.  Only if it turns out that .wgetrc settings affect the bug, mail me the relevant parts of the
          file.
      3.  Please start Wget with -d option and send the log (or the relevant parts of it).  If Wget was compiled without
          debug support, recompile it.  It is much easier to trace bugs with debug support on.
      4.  If Wget has crashed, try to run it in a debugger, e.g. "gdb `which wget` core" and type "where" to get the back-
          trace.

SEE ALSO

GNU Info entry for wget.

AUTHOR

Originally written by Hrvoje Niksic <hniksicspam@spamxemacsspam.spamorg>.

COPYRIGHT

Copyright (c) 1996, 1997, 1998, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being "GNU General Public License" and "GNU Free Documentation License", with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License".

Edit Log

  • 2006-04-03 Transcribed from Ubuntu (breezy) manpages